2008 F150 Korr Pro Truck

Click the thumbnails for a better picture!

Finished in 2008 with approximatly 1500-2000 hours of build time.
Frame is a 1990 F-150 front clip with tube back half.
Motor:
  • 351w – stroked to a 408
  • 96 F-150 roller block
  • Eagle stroker kit
  • 10.5:1 pistons
  • Edelbrock victor jr. heads
  • Edelbrock victor jr intake
  • MSD ignition
  • Holley offroad carb, 750 cfm
  • Comp dual pattern cam
  • Roller lifters, pushrods, and rockers
  • BBK headers
  • Jones 3 stage dry sump w/Moroso tank
  • Edelbrock high flo water pump
  • Dynoed at 530hp & 540 ft/lbs torque
Transmission:
  • C6 with TC1 pan and filter kit
  • Manual shift vavle body
  • TCS 3000 stall torque converter
  • E409 planetary gears large 5 drum
  • Green metallic clutch packs, short shaft
  • Drive products 1350 yoke
Differential:
  • Sandy Cone, trussed, full floater with chromoly tubes
  • 40 spline gun drilled axles
  • Strange center section
  • Yukon 40 spline spool
Steering:
  • Howe 14:1 box
  • Howe hydraulic pump
  • Howe hydraulic ram assist
  • Howe resevoir and filter
Brakes:
  • Willwood dual master cylinders
  • Front 6 piston calipers with 13″ rotors
  • Rear 4 piston calipers with 12″ rotors
Suspension:
  • King 2.5″ dual rate coilovers
  • Fox air bump stops
  • 20″ front wheel travel
  • 24″ rear wheel travel
  • Ford widened twin traction beam
  • 3 Link rear suspension
  • Dual Rancho limit straps on each corner
Extras:
  • 16 Gallon fuel cell
  • Holley fuel pump
  • Dual fresh air helmet pumper
  • Corbeau baja ss ultra wide seats
  • Corbeau 3″ 5 point camlock harnesses
  • Full Autometer guage cluster
Body:
  • 2004-2008 Ford F-150 Boatec Fiberglass
  • Gold and black basecoat, clearcoat paint

facebook

Powered By:
Rancho
ICBC
Warn
BanksPower
AMS OIL
CAA